
BDS 6″ Suspension Lift for 2011–2013 Ram 2500 and 3 more trucks
Long Arm · Part number BDS 635FS
$2,768.55the kit
Tell us your truck and we'll check this kit against it.
Choose a version
6″ Suspension Lift The maker lists no difference between these two except the part number and the price. Part 635H $2,168.55 6″ Suspension Lift The maker lists no difference between these two except the part number and the price. Part 635FS $2,768.55How much taller your truck sits.
Better shocks ride smoother. Same height.
$2,768.55 the kit
Questions about fit? Call (903) 249-4714
Price and fit confirmed on your call. Nothing charged online.
Before you buy
APG, the distributor, describes this kit as: 09-13 Dodge Gas 6/4 LA Block w/ 4in axle
What it does
- Raises the truck 6″
- Room for tires up to 37″, the maker says
What you get
- Tubular long arms reduce caster change and create more controlled feeling on and off road
- Heavy duty control arm brackets maintain proper suspension geometry
- Front high strength progressive rate coil springs for a
What else you might need
- An alignment once it is fitted
- Bigger tires to fill the space
About this kit
Built to outperform, BDS Suspension engineered a 6-inch lift kit with long arm conversion for your 2009-2013 Dodge RAM 2500 gas powered truck that maximizes performance on and off road. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires. BDS built the long lower control arms to reduce caster change through wheel travel which creates a more controlled feeling in the steering wheel. This long arm long arm system retains the factory triangulation of the arms which adds to the stability of the suspension system. Up front the lift kit includes gas-specific Pro-Ride coil springs, all four control arms plus mounting bracket, forged drop pitman arm and track bar bracket for steering correction, bump stops, sway bar links, and precision tuned NX2 or FOX 2.0 nitrogen charged shocks. In the rear this kit utilizes heavy duty cast steel blocks, longer u-bolts, and a matching set of NX2 Nitro or FOX 2.0 Performance shocks. Pro-Ride Coil Springs A pair of full-length, gas-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind. Steering Correction To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
Highlights
- Tubular long arms reduce caster change and create more controlled feeling on and off road
- Heavy duty control arm brackets maintain proper suspension geometry
- Front high strength progressive rate coil springs for a
Trucks it fits
| Truck | Years | Drive | Trims |
|---|---|---|---|
| Dodge Ram 2500 | 2009–2010 | 4WD | All |
| Dodge Ram 3500 | 2009 | 4WD | All |
| Ram 2500 | 2011 | 4WD | All |
| Ram 2500 | 2012 | 4WD | Outdoorsman |
| Ram 2500 | 2012–2013 | 4WD | Laramie, Laramie Longhorn, Power Wagon, R/T, SLT, ST |
| Ram 2500 | 2013 | 4WD | Big Horn, Lone Star, Outdoorsman, SXT, Tradesman |
| Ram 3500 | 2011 | 4WD | SXT |
| Ram 3500 | 2011–2012 | 4WD | Laramie, SLT, ST |
More for the Ram 2500 & 3500.
How it works
- Each truck's own page has its bolt pattern, tire sizes, and the wheels and kits that fit.
- True to size. Fitment measured to the inch.