
BDS 4″ Suspension Lift with FOX 2.0 Performance shocks for 2019–2024 Ram 3500
4-Link · Part number BDS 1668FS
$2,952.55the kit
Tell us your truck and we'll check this kit against it.
Choose a version
NX2 shocks Adjusters: not stated by maker Part 1668H $2,352.55 FOX 2.0 Performance shocks Adjusters: not stated by maker Part 1668FS $2,952.55 FOX 2.5 Performance shocks Adjusters: not stated by maker Part 1668PS $3,432.55 FOX 2.5 Performance Elite shocks Adjusters: DSC Part 1668FPE $5,684.65How much taller your truck sits.
Better shocks ride smoother. Same height.
$2,952.55 the kit
Questions about fit? Call (903) 249-4714
Price and fit confirmed on your call. Nothing charged online.
Before you buy
APG, the distributor, describes this kit as: 19-20 Ram 3500 4 4-Link Diesel - 3 Rear Block w/o overload - 8 Bolt T-Case - Fox Shocks
What it does
- Raises the front 4″ and the rear 3″
- Room for tires up to 37″, the maker says
- Comes with FOX 2.0 Performance shocks
What you get
- Heavy duty 4-link improve strength, handling and caster control
- Front high strength dual rate coil springs for a great ride on any terrain
- Front track bar relocation bracket to re-position axle
- Forged dro
What else you might need
- An alignment once it is fitted
- Bigger tires to fill the space
About this kit
Built to outperform, BDS Suspension engineered a 4-inch lift kit with 4-Link conversion for your RAM 3500 diesel powered truck that will surely impress. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires. Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks. At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks. 4-Link Conversion Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel. Pro-Ride Coil Springs A pair of full-length, dual rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Steering Correction To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
Highlights
- Heavy duty 4-link improve strength, handling and caster control
- Front high strength dual rate coil springs for a great ride on any terrain
- Front track bar relocation bracket to re-position axle
Trucks it fits
| Truck | Years | Drive | Trims |
|---|---|---|---|
| Ram 3500 | 2019–2023 | 4WD | All |
| Ram 3500 | 2024 | 4WD | Big Horn, Laramie, Limited, Limited Longhorn, Tradesman |
More for the Ram 2500 & 3500.
How it works
- Each truck's own page has its bolt pattern, tire sizes, and the wheels and kits that fit.
- True to size. Fitment measured to the inch.