
BDS 6″ Suspension Lift for 2014–2018 Ram 2500
4-Link · Part number BDS 1628FS
$3,345.55the kit
Tell us your truck and we'll check this kit against it.
Choose a version
6″ Suspension Lift The maker lists no difference between these two except the part number and the price. Part 1628H $2,745.55 6″ Suspension Lift The maker lists no difference between these two except the part number and the price. Part 1628FS $3,345.55How much taller your truck sits.
Better shocks ride smoother. Same height.
$3,345.55 the kit
Questions about fit? Call (903) 249-4714
Price and fit confirmed on your call. Nothing charged online.
Before you buy
APG, the distributor, describes this kit as: 14-18 Ram 2500 6/5 4link w/air bag-Dsl
What it does
- Raises the truck 6″
- Room for tires up to 37″, the maker says
What you get
- Heavy duty 4-link arms improve strength, handling and caster control
- High strength progressive rate coil springs for a great ride on any terrain
- Track bar relocation brackets to re-position axle
- Forged dr
What else you might need
- An alignment once it is fitted
- Bigger tires to fill the space
About this kit
Built to outperform, BDS Suspension engineered a 6-inch lift kit with 4-Link conversion for your 2014-2018 RAM 2500 diesel powered truck that will surely impress. Works on factory air ride trucks only. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires. Up front the lift kit includes diesel-specific Pro-Ride coil springs, 4-Link control arms with conversion mounts, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks. At this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes heavy duty air bag spacers, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks. BDS also supplies new air ride leveling sensor brackets to re-position the ride height sensors allowing it to perform just like it does at factory ride height and maintain full air bag range of motion. 4-Link Conversion Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This weld/bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel. Pro-Ride Coil Springs A pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter
Highlights
- Heavy duty 4-link arms improve strength, handling and caster control
- High strength progressive rate coil springs for a great ride on any terrain
- Track bar relocation brackets to re-position axle
Trucks it fits
| Truck | Years | Drive | Trims |
|---|---|---|---|
| Ram 2500 | 2014–2015 | 4WD | Lone Star |
| Ram 2500 | 2014–2018 | 4WD | Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Outdoorsman, SLT, ST, Tradesman |
| Ram 2500 | 2016–2018 | 4WD | Limited |
More for the Ram 2500 & 3500.
How it works
- Each truck's own page has its bolt pattern, tire sizes, and the wheels and kits that fit.
- True to size. Fitment measured to the inch.