
Rough Country 6″ Suspension Lift with Vertex 2.5 reservoir shocks for 2017–2022 Ford F-250 Super Duty and 2017–2022 Ford F-350 Super Duty
Diesel · 4-Link · dual steering stabilizer · coilovers · Part number Rough Country 50759
$4,209.95the kit
In stock at Rough Country · as of Nov 9
Tell us your truck and we'll check this kit against it.
Choose a version
V2 monotube shocks In the box: V2 MONOTUBE SHOCK PAIR, 4.5 In Block U-Bolt Kit No Overloads Part 50758 $3,569.95 V2 monotube shocks In the box: V2 MONOTUBE SHOCK PAIR, 6.5 In Block U-Bolt Kitoverloads Part 50858 $3,569.95 Vertex 2.5 reservoir shocks In the box: Vertex 2.5 RR 6 In, 4.5 In Block U-Bolt Kit No Overloads Part 50759 $4,209.95 Vertex 2.5 reservoir shocks In the box: Vertex 2.5 RR 6 In, 6.5 In Block U-Bolt Kitoverloads Part 50859 $4,209.95How much taller your truck sits.
Better shocks ride smoother. Same height.
$4,209.95 the kit
Questions about fit? Call (903) 249-4714
Price and fit confirmed on your call. Nothing charged online.
Before you buy
Models equipped with a 10-speed transmission must remove dial pin. Does NOT fit gas engine models. Does NOT fit manual shift transfer cases Does NOT fit dually models. New fabricated lift block replaces the factory equipped lift block. Does NOT work on models equipped with Tremor Factory Trim Package.
What it does
- Raises the truck 6″
- Comes with Vertex 2.5 reservoir shocks
What else you might need
- An alignment once it is fitted
- Bigger tires to fill the space
About this kit
Superior Ride Quality. Give your fourth-generation Ford Super Duty an impressive upgrade and incredible ride quality with Rough Country’s 4-Link Coilover Conversion Lift Kit! This must-have kit is the pinnacle of suspension upgrades. Providing ride height adjustability, increased dampening, and killer good looks. You're sure to set yourself apart from the pack. This innovative kit allows you to replace your factory arms with a 4-Link setup, using Rough Country’s durable, fixed upper arms and adjustable lower control arms. A set of radius arm drop brackets maintain proper geometry and allow for proper caster setting, which is crucial to maintaining factory handling. Durable Components. Rough Country’s 6" 4-Link Coilover Conversion Lift Kit features top-mounted reservoir brackets and coil-over mounts constructed from 1/4-inch steel. Utilizing this conversion kit you're removing the factory independent coil shock and coil set-up and replacing it with a massive 2.5in piston, nitrogen-charged, 8-stage adjustable Vertex Coilover. Rough Country’s Vertex Coilovers feature a monotube design with an external reservoir for increased oil capacity and damping sensitivity. When it comes to investing in a high-end kit, you’ll be pleased to find that Rough Country’s 2.5in piston design is beefier and offers an impressive 56% greater fluid capacity than the average reservoir shock. Each kit is paired with a monotube shock that provides optimal damping control. Installation. Requiring cutting and drilling to install, an estimated timeframe of 6-10 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty. Rough Country’s 4-Link Coilover Conversion Lift Kit is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!
Highlights
- Easy bolt-on installation. Increased ground clearance. Levels the front with the rear of the vehicle. Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability. Fabricated blocks are stronger and offer a longer lifespan than cast blocks. Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problems.
What's in the box
- 1 × CV Drive Shaft | Front | Diesel | Ford F-250/F-350 Super Duty 4WD (2017-2023) Part #5068.1
- 1 × Univ. 3 4 X 4 1 X 1 2in U-Bolt Kit | Ford Super Duty (17-22) Part #7673
- 2 × Vertex 2.5 RR 6 In | Ford Super Duty (17-25) Part #695805
- 1 × 6" Kit Box | Coilover Conversion | Ford Super Duty (17-22) Part #50010991
- 1 × 56020 Box Kit | Ford Super Duty (17-22) Part #1560BOX1
- 1 × 4.5-6in Up Arm Kit | Ford Super Duty (17-22) Part #1560BOX2
- 1 × 4.5-6in Lower Arms | Ford Super Duty (17-22) Part #1560BOX3
- 1 × 4.5 In Block U-Bolt Kit No Overloads | Ford Super Duty (11-22) Part #1563BOX4
- 1 × Vertex 2.5 Adj FR Lh 4.5IN-6.IN | Ford F250/F350 4WD (05-22) Part #685042L
- 1 × Vertex 2.5 Adj FR Rh 4.5IN-6.IN | Ford F250/F350 4WD (05-22) Part #685042R
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 50759 |
| UPC | 840269915055 |
| Lift | 6″ |
| Shipping weight | 369 lb |
| Country of origin | Thailand |
| Shipping | Ground shipping only · Arrives in more than one box |
Trucks it fits
| Truck | Years | Drive | Trims |
|---|---|---|---|
| Ford F-250 Super Duty | 2017–2022 | 4WD | King Ranch, Lariat, Platinum, XL, XLT |
| Ford F-250 Super Duty | 2018–2022 | 4WD | Limited |
| Ford F-350 Super Duty | 2017–2022 | 4WD | King Ranch, Lariat, Platinum, XL, XLT |
| Ford F-350 Super Duty | 2018–2022 | 4WD | Limited |
More for the Ford F-250 & F-350 Super Duty.
Installation
How it works
- Each truck's own page has its bolt pattern, tire sizes, and the wheels and kits that fit.
- True to size. Fitment measured to the inch.